You may have noticed that cordless glue guns are used in many DIY projects. You may not have used a glue gun before, or you don’t know what a glue gun is. You may think it is suitable for heavy wood and paper DIY projects, but it is not suitable for making soft and delicate photo tools with textiles and wool! This article allows you to understand the knowledge of hot glue guns.
How to Use The Cordless Hot Glue Gun?
In essence, the glue gun is an electronic device that uses a heating element to heat a special solid hot rubber rod to melt it.
If you want to become more technical! The spray gun uses a continuously working heating element to dissolve the plastic adhesive. You can use the mechanical trigger mechanism of the gun or push it directly into the gun with your fingers. The adhesive sticks together as soon as it heats up and solidifies within a few seconds to a minute.
There is nothing better than a glue gun for handicrafts and quick and easy maintenance. Unlike other adhesives, hot melt adhesives can be applied smoothly, dry quickly, and remain firm when applied to various surfaces. Although its fixing force is not the strongest, there are almost more materials that can be used for bonding than other adhesives. Just follow a few basic steps and keep in mind the safety standards, using a hot glue gun is easy.
I like the cordless hot glue gun. Because these two elements can quickly and easily establish a strong connection. There is no need to wait for it to dry, and no need to stand there and put the two parts together for several years. That can stick everything… silk, fabric, jute, wool, buttons, beads, ribbons, lace, etc.!
Suitable for more types of surfaces, cleaner, not wrinkled, and bleed on paper like some craft rubbers. A small amount of hot glue can make DIY production longer.
Wait for the adhesive to heat up. Take a few minutes to soften the glue. After it is completely melted, pull the trigger and the adhesive will ooze out. For most rubber guns, heating takes about two minutes. It may take five minutes for a large industrial rubber gun to heat the adhesive to make it easy to dispense.
There are on/off switches in the rubber gun, and there are none. For this reason, the model must be placed in the “open” position before starting to heat the adhesive. Otherwise, it starts to heat up as soon as it is inserted.
When not in use, place the glue gun on the base of the wire rack. Please do not put the movable rubber gun nearby.
Gently press the trigger to release the melted adhesive.
The nozzle of the glue gun faces downward and approaches the object to be coated with rubber. Gently press the trigger of the spray gun until the molten adhesive starts to flow out of the nozzle. Attach it directly to the surface of the article so that the nozzle touches. Apply the adhesive smoothly into dots, spirals, or straight lines.
In order to catch the scattered adhesive, place old cardboard or foil under the object to be bonded.
Before using the glue gun in a project that requires precision, try to paste some disposable materials to understand the feel of the glue gun.
If possible, wear gloves when using a hot glue gun to protect your hands from heat and confusion.
Use only necessary adhesives, to avoid waste, you can buy glue sticks at cheap tools.
Start with the right number of adhesives and see if you need more. The glue goes a long way. Pull the trigger. The melted glue will flow quickly, accidentally using too much. Please don’t let your sticky things penetrate into the messy sphere and don’t apply adhesives. Because the adhesive can be installed fairly quickly, only use the necessary amount.
Reads More: 2021 Best Flexible Screwdrivers
Due to its thick gel-like viscosity, hot melt adhesives are more suitable for bonding thin and fragile surfaces than liquid adhesives, such as pastes or strong adhesives. Water-based glue is difficult to apply and takes a long time to take effect. It is easier to damage sensitive materials than hot glue. Hot glue is also universal and usually sticks to moody objects that are not suitable for other types of adhesives.